Bandtransport Europe supplies the best conveyor belts for use in vegetable cultivation. Less manpower is needed when conveyor belts are applied. As a result, vegetables will still be fresh when they arrive at their destinations: retailers or vegetable processors.
Conveyor belts that are used in vegetable cultivation are often exposed to extreme conditions. Temperature differences, moisture, and dirt all have an influence on the functioning of a conveyor belt. Still, it must perform trouble-free, even during freezing cold weather, in the rain or on a muddy field, as crops must be harvested at the right time. Any downtime quickly results in a loss of income.
With many years of experience in agriculture and horticulture, Bandtransport Europe supplies the right conveyor belt for each application, whether you work with sprouts, beans, cabbage or lettuce. No matter the season in which it is used, the conveyor belt is attuned to its purpose. Belts for heavy or light loads, with corrugated sidewalls in order to keep products on the belt and cleats, where necessary, for ascending and descending transport: we supply them all. With the right belt, operations will run smoothly and you’ll be finished quickly.
Bandtransport Europe has one of the largest and most extensive fabrication workshops in Europe. This offers unprecedented possibilities for the development of new products or the customisation of existing products according to your specific demands. In consultation with end users and machine manufacturers, we have developed a special extra-high cleat for use during cabbage harvest. Do you encounter specific problems? We'd be pleased to help you find the solution.
On this page, you will find a number of conveyor belts that are suitable for use in vegetable cultivation. You will find additional information on the various products by clicking on the type codes. Can’t you find what you are looking for? Please feel free to contact us. We will be happy to assist you.
We also offer the right conveyor belts for use in the fruit and vegetable processing industry.
Conveyor belt type 11-11 PVC, green, 1-ply flexible fabric (E), top side: 0,6mm, bottom side: 0,6mm + diamond profile, thickness 2,0mm, hardness 80° ShA, force-elongation 8N/mm, pulleydiameter 35mm, rollers, slider bed and troughed installation, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 11-21 PVC, white, 1-ply flexible fabric (E), top side: 0,6mm, bottom side: 0,6mm + diamond profile, thickness 2,0mm, hardness 65° ShA, force-elongation 8N/mm, pulleydiameter 35mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 11-31M PVC, anthracite, 1-ply flexible fabric (E), top side: 0,6mm, bottom side: 0,6mm + diamond profile, thickness 2,0 mm, hardness 80° ShA, force-elongation 8N/mm, pulleydiameter 35mm, rollers, slider bed and troughed installation, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 11-81 PVC, blue, 1-ply flexible fabric (E), top side: 0,6mm, bottom side: 0,6mm + diamond profile, thickness 2,0mm, hardness 65° ShA, force-elongation 8N/mm, pulleydiameter 35mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 12-24 PVC, white, 1-ply lateral stable fabric (R), top side: 0,3mm, bottom side: impregnated fabric, thickness 0,85mm, hardness 65° ShA, force-elongation 6N/mm, pulleydiameter 10mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 21-21 PVC, white, 2-ply flexible fabric (E), top side: 0,7mm, bottom side: 0,6mm + diamond profile, thickness 3,15mm, hardness 65° ShA, force-elongation 15N/mm, pulleydiameter 50mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 21-23 PVC, white, 2-ply flexible fabric (E), top side: 2,0mm, bottom side: 0,6mm + diamond profile, thickness 4,45mm, hardness 65° ShA, force-elongation 15N/mm, pulleydiameter 80mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor Belt Type 21-24 PVC, white, 2-ply flexible fabric (E), top side: 0,7mm, bottom side: fabric, thickness 2,4mm, hardness 65° ShA, force-elongation 15N/mm, pulleydiameter 40mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor Belt Type 21-81 PVC, blue, 2-ply flexible fabric (E), top side: 0,7mm, bottom side: 0,6mm + diamond profile, thickness 3,15mm, hardness 65° ShA, force-elongation 15N/mm, pulleydiameter 50mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 21-83 PVC, blue, 2-ply flexible fabric (E), top side: 2,0mm, bottom side: 0,6mm + diamond profile, thickness 4,45mm, hardness 65° ShA, force-elongation 15N/mm, pulleydiameter 80mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 22-16/6 PVC, green, 2-ply lateral stable fabric (R), top side: 2,0mm + sawtooth profile, bottom side: fabric, thickness 4,8mm, hardness 60° ShA, force-elongation 10N/mm, pulleydiameter 60mm, rollers, and slider bed, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 22-26 PVC, white, 2-ply lateral stable fabric (R), top side: 2,0mm, bottom side: impregnated, thickness 3,7mm, hardness 65° ShA, force-elongation 10N/mm, pulleydiameter 60mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 22-26/6 PVC, white, 2-ply lateral stable fabric (R), top side: 2,0mm + sawtooth profile, bottom side: impregnated, thickness 4,5mm, hardness 65° ShA, force-elongation 10N/mm, pulleydiameter 60mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 22-31 PVC, black, 2-ply lateral stable fabric (R), top side: 0,7mm, bottom side: 0,6mm + diamond profile, thickness 3,15mm, hardness 80° ShA, force-elongation 10N/mm, pulleydiameter 50mm, rollers and slider bed, antistatic cover, temperature -15°C to 90°C
PVC, anthracite, 2-ply lateral stable fabric (R), top side: 0,7mm, bottom side: 0,7mm + diamond profile, thickness 3,45mm, hardness 80° ShA, force-elongation 10N/mm, pulleydiameter 50mm, rollers and slider bed, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 22-34 PVC, black, 2-ply lateral stable fabric (R), top side: 0,7mm, bottom side: black impregnated, thickness 2,4mm, hardness 80° ShA, force-elongation 10N/mm, pulleydiameter 40mm, rollers and slider bed, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 22-36/3W PVC, black, 2-ply lateral stable fabric (RL/RXA), top side: 1,9mm + wavegrip profile, bottom side: fabric, thickness 5,1mm, hardness 35° ShA, force-elongation 11N/mm, pulleydiameter 40mm, rollers and slider bed, antistatic fabric, low noise, temperature -25°C to 70°C
Conveyor belt type 22-38M PVC, anthracite, 2-ply lateral stable fabric (R), top side: 1,9mm, bottom side: 1,6mm + matt finish, thickness 5,2mm, hardness 80° ShA, force-elongation 10N/mm, pulleydiameter 100mm, rollers, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 26-35A/19 PVC, zwart, 2-layer Polyester monofilament, lateral stability, low noise fabric, Thickness cover 1,2mm, bottom side 0,0mm, Hardness 35° ShA, Tension force 10N/mm, Pulleydiameter flection 40mm, 80mm contraflect, Carryingrollers and Slider bed, Temperature -10°C tot 80°C
Conveyor belt type 26-35A (basketweave) PVC, black, 2-ply width-stable fabric, top side: 1,0mm, bottom side: 0,0mm, thickness 2,7mm, hardness 35° ShA, force-elongation 11N/mm, pulleydiameter 50mm bending and 80mm counter bending, roll and slide support, temperature -25°C to 70°C
Conveyor belt type 21-34 PVC, black, 2-layer multifilament fabric (E), Thickness top side: 0,6mm, bottom side: 0,0mm, Thickness 2,3mm, Hardness 70° ShA, kracht-rek 12N/mm, Minimum pulley diameter 50mm, Carrying- slider and Throughed support-, antistatic in two directions, temperature -10°C tot 80°C
Conveyor belt type 22-81/A80/251/FG PVC, light blue, 2-ply lateral stable fabric (R), top side: 0,7mm, bottom side: 0,6mm + diamond profile, thickness 3,25mm, hardness 80° ShA, force-elongation 10N/mm, pulleydiameter 40mm, rollers and slider bed, FDA/EU approved, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 22-81 PVC, blue, 2-ply lateral stable fabric (R), top side: 0,7mm, bottom side: 0,6mm + diamond profile, thickness 3,25mm, hardness 65° ShA, force-elongation 10N/mm, pulleydiameter 50mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 22-81/A80/FG PVC, blue, 2-ply lateral stable fabric (R), top side: 0,7mm, bottom side: 0,6mm + diamond profile, thickness 3,25mm, hardness 80° ShA, force-elongation 10N/mm, pulleydiameter 50mm, rollers and slider bed, FDA/EU approved, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 22-84 PVC, blue, 2-ply lateral stable fabric (R), top side: 0,7mm, bottom side: impregnated , thickness 2,4mm, hardness 65° ShA, force-elongation 10N/mm, pulleydiameter 40mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 22-84/A80/251/FG PVC, light blue, 2-ply lateral stable fabric (R), top side: 0,7mm, bottom side: impregnated, thickness 2,4mm, hardness 80° ShA, force-elongation 10N/mm, pulleydiameter 40mm, rollers and slider bed, FDA/EU approved, antistatic cover, temperature -15°C to 90°C
Conveyor belt type 22-86 PVC, blue, 2-ply lateral stable fabric (R), top side: 2,0mm, bottom side: impregnated, thickness 3,7mm, hardness 65° ShA, force-elongation 10N/mm, pulleydiameter 60mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 22-86/3W PVC, blue, 2-ply lateral stable fabric (RL/RXA), top side: 2,0mm + wavegrip profile, bottom side: impregnated, thickness 5,1mm, hardness 35° ShA, force-elongation 11N/mm, pulleydiameter 40mm, rollers and slider bed, antistatic fabric, low noise, temperature -25°C to 70°C
Conveyor belt type 31-28VD PVC, white, 3-ply flexible fabric (E), top side: 2,0mm, bottom side: 1,0mm + matt finish, thickness 6,25mm, hardness 80° ShA, force-elongation 23N/mm, pulley diameter 120mm, rollers and troughed installation, FDA/EU approved, antistatic cover, antistatic fabric, flame retardant, temperature -15°C to 90°C
Conveyor belt type 31-81 PVC, blue, 3-ply flexible fabric (E), top side: 0,7mm, bottom side: 0,6mm + diamond profile, thickness 4,6mm, hardness 65° ShA, force-elongation 23N/mm, pulleydiameter 100mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 32-84 PVC, blue, 3-ply lateral stable fabric (R), top side: 0,7mm, bottom side: impregnated , thickness 3,55mm, hardness 65° ShA, force-elongation 13N/mm, pulleydiameter 80mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type 32-81 PVC, blue, 3-ply lateral stable fabric (R), top side: 0,7mm, bottom side: 0,6mm + diamond profile, thickness 4,6mm, hardness 65° ShA, force-elongation 13N/mm, pulleydiameter 80mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -10°C to 110°C
Conveyor belt type FPS10-08/0 Fabplast® (PE), transparent, 1-ply spun polyester fabric, top side: 0,3mm + matt finish, bottom side impregnated (0,2mm), thickness 1,05mm, hardness 90°ShA, force-elongation 5N/mm, pulleydiameter 20mm, rollers, slider bed, and troughed installation, FDA/EU approved, antistatic fabric, oil and fat resistant, temperature-50°C to 70°C.
Conveyor belt type FPS20-04i Fabplast® (PE), transparent, 2-ply frayless polyester fabric lateral stable (RFLA), top side: 0,5mm, bottom side: 0,2mm + matt finish, thickness 2,2mm, hardness 90° ShA, force-elongation 10N/mm, pulleydiameter 25mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, antistatic frayless fabric, temperature -50°C to 70°C
Conveyor belt type FPS20-81 Fabplast® (PE), blue, 2-ply lateral stable frayless fabric (RFLA), top side: 0,5mm, bottom side: 0,5mm + diamond profile, thickness 2,9mm, hardness 90° ShA, force-elongation 10N/mm, pulleydiameter 30mm, rollers, slider bed and troughed installation, FDA/EU approved, antistatic fabric, frayless fabric, temperature -50°C to 70°C
Conveyor belt type FPS20-84i Fabplast® (PE), blue, 2-ply frayless polyester fabric lateral stable (RFLA), top side: 0,5mm, bottom side: 0,2mm + matt finish, thickness 2,2mm, hardness 90° ShA, force-elongation 10N/mm, pulleydiameter 25mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, antistatic frayless fabric, temperature -50°C to 70°C
Conveyor belt type FPS20-01 Fabplast® (PE), transparent, 2-ply lateral stable frayless fabric (RFLA), top side: 0,5mm, bottom side: 0,5mm + diamond profile, thickness 2,9mm, hardness 90° ShA, force-elongation 10N/mm, pulleydiameter 30mm, rollers, slider bed and troughed installation, FDA/EU approved, antistatic fabric, frayless fabric, temperature -50°C to 70°C
Conveyor belt type SB22-07UA blue, 2-ply lateral stable fabric (R/RA), top side: fabric + 0,3mm Silicon, bottom side: impregnated, thickness 1,6mm, force-elongation 10N/mm, pulleydiameter 25 mm, slider bed, FDA/EU approved, antistatic fabric, temperature -30°C to 110°C
Conveyor belt type SW22-07UA white, 2-ply lateral stable fabric (R/RA), top side: fabric + 0,3mm Silicon, bottom side: impregnated, thickness 1,3mm, force-elongation 10N/mm, pulleydiameter 25 mm, slider bed, FDA/EU approved, antistatic fabric, temperature -30°C to 110°C
Conveyor belt type U22S-06A PU, transparent, 2-ply lateral stable fabric (RHA), top side: 1,5mm, bottom side: impregnated (0,2mm) PVC, thickness 3,9mm, hardness 92° ShA, force-elongation 10N/mm, pulleydiameter 100mm, rollers and slider bed, FDA/EU approved, antistatic fabric, oil and fat resistant, temperature -20°C to 100°C
Conveyor belt type UG12-24 SPU, white, 1-ply lateral stable fabric (R), top side: 0,2mm, bottom side: impregnated, thickness 0,75mm, hardness 86° ShA, force-elongation 6N/mm, pulleydiameter 10mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -40°C to 100°C
Conveyor belt type UM21-24 SPU, white, 2-ply flexible fabric (E), top side: 0,2mm + matt finish, bottom side: impregnated, thickness 1,5mm, hardness 86° ShA, force-elongation 15N/mm, pulleydiameter 25mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -10°C to 80°C.
Conveyor belt type UM22-24 PU, white, 2-ply lateral stable fabric (R), top side: 0,2mm + matt finish, bottom side: impregnated, thickness 1,5mm, hardness 92° ShA, force-elongation 10N/mm, pulleydiameter 20mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -20°C to 100°C
Conveyor belt type UM22-26 PU, white, 2-ply lateral stable fabric (R), top side: 0,7mm + matt finish, bottom side: impregnated, thickness 2,0mm, hardness 92° ShA, force-elongation 10N/mm, pulleydiameter 40mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -20°C to 100°C
Conveyor belt type UM27-24 (KRMA) SPU, white, 2-ply lateral stable fabric (KRMA), top side: 0,2mm + matt finish, bottom side: impregnated, thickness 1,05mm, hardness 86° ShA, force-elongation 11N/mm, pulleydiameter 4mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, low stretch, temperature -40°C to 100°C
Conveyor belt type UM21-84 SPU, blue, 2-ply flexible fabric (E), top side: 0,2mm + matt finish, bottom side: impregnated, thickness 1,5mm, hardness 86° ShA, force-elongation 15N/mm, pulleydiameter 25mm, rollers, slider bed and troughed installation, FDA/EU approved, oil and fat resistant, temperature -40°C to 100°C
Conveyor belt type UM22-84 PU, blue, 2-ply lateral stable fabric (R), top side: 0,3mm + matt finish, bottom side: impregnated, thickness 1,6mm, hardness 92° ShA, force-elongation 10N/mm, pulleydiameter 24mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, temperature -20°C to 100°C
Conveyor belt type UG27-85 SPU, blue, 2-ply lateral stable fabric (DRAFP), top side: 1,0mm, bottom side: impregnated, thickness 2,15mm, hardness 86° ShA, force-elongation 14N/mm, pulleydiameter 30mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, antistatic fabric, low stretch, temperature -40°C to 100°C
Conveyor belt type UG27-88/0 PU, blue, 2-ply lateral stable fabric (RMA), top side: 0,5mm, bottom side: 0,4mm + matt finish, thickness 2,15mm, hardness 92° ShA, force-elongation 17N/mm, pulleydiameter 40mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, antistatic fabric, low stretch, temperature -20°C to 100°C
Conveyor belt type UM27-84 (KRMA) SPU, blauw, 2-ply lateral stable fabric (KRMA), top side: 0,2mm + matt finish, bottom side: impregnated, thickness 1,05mm, hardness 86° ShA, force-elongation 11N/mm, pulleydiameter 4mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, low stretch, temperature -40°C to 100°C
Conveyor belt type UG27-25 SPU, white, 2-ply lateral stable fabric (RMA), top side: 1,0mm, bottom side: impregnated, thickness 2,15mm, hardness 86° ShA, force-elongation 17N/mm, pulleydiameter 30mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, antistatic fabric, low stretch, temperature -40°C to 100°C
Conveyor belt type UM15-84 SPU, blue, 1-ply Polyester monofilament, with lateral stability, light construction (LRFP), top side: 0,2mm, bottom side: 0,1mm, thickness 0,7mm, hardness 87° ShA, force-elongation 4N/mm, pulleydiameter 6mm, rollers and slider bed installation, temperature -20°C to 80°C
Conveyor belt type UM22-85/1 PU, blue, 2-ply Polyester monofilament, with lateral stability fabric (R), top side: 0,3mm, bottom side: 0,1mm, thickness 2,05mm, hardness 92° ShA, force-elongation 10N/mm, pulleydiameter 25mm, rollers and slider bed installation, temperature -20°C to 100°C
Conveyor belt type UG27-85 (sharp nipple), SPU, blue, 2-ply lateral stable fabric (DRAFP), top side: 1,0mm + sharp nipple profile, bottom side: impregnated, thickness 3,65mm, hardness 86° ShA, force-elongation 14N/mm, pulleydiameter 30mm, rollers and slider bed, FDA/EU approved, oil and fat resistant, antistatic fabric, low stretch, temperature -40°C to 100°C
Conveyor belt type 11SW-86 (crescent), PVC, blue, 1-ply Solid woven fabric (SW), top side: 3,7 mm, bottom side: 0,1 mm, thickness 6,5mm, hardness 78° ShA, force-elongation 21N/mm, pulleydiameter 100mm, rollers- slider- and troughed installation, temperature -5°C to 80°C.
Conveyor belt type UM27-34, PU, Petrol, 2-ply Polyester monofilament, with lateral stability, antistatic fabric (DRAFT), top side: 0,3mm, bottom side: 0,1mm + matt finish, thickness 1,45mm, hardness 93° ShA, force-elongation 14N/mm, pulleydiameter 15mm, rollers, slider installation, temperature -20°C to 80°C
Conveyor belt type UM27-74, PU, Petrol, 2-ply Polyester monofilament, with lateral stability, antistatic fabric (DRAFT), top side: 0,3mm, bottom side: 0,1mm + matt finish, thickness 1,5mm, hardness 93° ShA, force-elongation 14N/mm, pulleydiameter 15mm, rollers, slider installation, temperature -20°C to 80°C
